Industrial Cartridge Housings

CIH Series of multi cartridge housings with clamp closures are available in 304 SS or 316L SS. All CIH housings are designed with Universal cartridge cups, allowing you the use of DOE style cartridges or 2-222 SOE cartridges with fin or flat end.

CIH multi cartridge swing bolt closure housings are a proven design suited for commercial and industrial applications. Available in 304SS or 316L SS. Standard with Universal seal cups to accept DOE & 222 single open end fin or flat cartridges. Housings are standard with food grade EP gasket and also offered in other materials and port sizes, allowing the CIH to meet a wide spectrum of applications.

CHR single cartridge ring closure housings are available in 304 SS, 316 SS or Brass head with 304 SS sump and are designed for DOE style cartridges with machined knife edge seal surfaces for a no-bypass seal. All sump seals are spring loaded for a variety of cartridge lengths and quick cartridge change outs.

CHPN natural polypropylene housings are manufactured using high purity 100% all polypropylene materials giving you a wide range of compatibility and extremely low extractables. Available in ten or twenty inch lengths with 2-222 SOE or DOE style configurations. Inlet and outlet are 3/4”FNPT. The smooth finish of the CHPN make it ideal for high purity applications.

Model Selection

	Single Cartridge
Model	CHR		CHPN
Data sheets
Material	Stainless Steel		Natural Polypropylene
	Multi Cartridge Clamp Closure
Model	4 & 5 CIH		7 CIH
Data sheets
Material	Stainless Steel		Stainless Steel
Installation & Operation Instructions
	Multi Cartridge Swing Bolt Closure
Model	12 & 21 CIH		36, 52 & 80 CIH
Data sheets
Material	Stainless Steel		Stainless Steel
Drawings	12 CIH	21 CIH	36 CIH	52 CIH	80 CIH

Standard Features:
CIH Clamp Closure Series

• Universal configuration. DOE & 222 fin or flat cartridge types.
• Universal cups that are 100% back welded to guarantee a no by-pass seal.
• EP gasket: Food grade ethylene propylene gasket to meet the 300°. F temp. rating.
• Finish: B Blasted
• Hold down kob: Oversized custom made stainless steel wing nut.
• Operations & Spare parts manual
• Mounting tab kit included with every housing for models 4 & 5 (7 series has welded on legs)

Standard Features:
CIH Swing Bolt Closure Series

• All welded seams are argon welded for maxium corrosion
• Surface finish inside and out is #320 machine polished and passivated. Welds are ground smooth
• Built to ASME and GMP standards
• All swing bolt hardware are stainless steel components
• Mounting legs are Stainless Steel
• Lifting davit & wheel are Stainless Steel
• Operations & Spare parts manual

 *PDF files require Adobe Acrobat Reader.