Hotline: 0904.754.399

Công ty TNHH Công nghệ ATP Việt Nam

Tiếng việtEnglish


Màng lọc Syringe Simplepure
View Full-Size Image


Màng lọc Syringe Simplepure

( Công ty TNHH Công nghệ ATP Việt Nam )



Simplepure
  • HPLC certification which guarantees the filters will not produce extraneous peaks in the UV range.
  • 100% integrity tested with higher burst strength ratings assuring they will perform consistently.
  • Available in 13 and 25mm sizes and available in sterile, too.
  • 0.45µm for most clarification applications and 0.22 µm when fine particulate removal is required. Other pore sizes are available in 0.8µm-5µm.

Introduction

SimplepureTM Syringe Filters are simply quality filters, well packaged, and offered at a fair and competitive price. The Classic range is available in all of the major membranes including Nylon, PTFE, PES, MCE and PVDF, which are supplied in 13mm, 25mm formats in virgin medical polypropylene housings.
Syringe Filter
Agilent Technologies 1200, Column: C18 UV = 254 nmMob.phase:MeOH/H2O:20:80, Temperature: 25°C, Flow rate:0.8ml/min, sample:2mg/ml Bergenin(in Methanol)

Features

  • Application Compatibility: Broad range of filtration media meets diverse application needs
  • Minimum sample hold-up: Syringe Filters’ housings are specifically designed to maximize sample recovery
  • Convenient: Each unit is clearly marked with an identifying code to denote pore size, membrane material
  • Sterile: Filters can be purchased pre-sterilized by Gamma radiation and individually packaged
Syringe FilterWater flow at 1 bar

Application

  • HPLC sample preparation
  • Routine QC analysis
  • Content uniformity
  • Removal of protein precipitates
  • Dissolution testing
  • Food analysis
  • Biofuel analysis
  • Environmental samples
Syringe FilterOur SimplepureTM syringe filter with pre filter, your BEST CHOICE for hard-to-filter samples!

Membrane Solutions LLC

Simplepure syringe

Ordering information:
A: How to order?

Simplepure syringe

Ordering Information

Parameters 13mm 25mm
 Housing material Virgin Medical Polypropylene
Effective Filtration area (cm2 ) 1.09 4.08
 Pore Size (μm) 0.22, 0.45……
Holdup volume (μl) <25 <100
Sample volume (ml) <10 <100
Inlet connection Female luer lock
Outlet connection Male luer slip
Maximum Operating Temperature 50°C 50°C
Maximum Operating Pressure  6 bar 6 bar
How to select your sample preparation device?Step 1: Choose the suitable membrane filtration medium Characteristics of samples
Solutions Recommended
Solvent Mixtures Nylon, MCE
Tissue culture Media, Buffers, Protein Analysis/ Biological Samples CA, PVDF, PES
High Particulate Loads With GF or PP pre-filter
Aggressive or Pure Organic Solvents PTFE, PVDF
Step2: choose the suitable diameter
Volume of samples
<10ml <100ml
13mm 25mm
Step 3: Choose the suitable pore size based on the nature of your sample
  • Removal of high particulate matter with a glass fiber pre filter is critical before any drug, toxic, or dirty environmental sample is filtered to ensure the highest syringe filter membrane performance.
  • Generally, 0.45 µm porosity filters are used to remove particulates from samples and mobile phase solutions. For sterile-filtration, a 0.20 µm porosity filter can be used.
Note:
  1. Special specifications are available like pore size: 0.1um, 1.0um, 3.0um, 5.0um diameter: 13mm, 25mm, membrane medium: glass fiber, with pp or glass fiber pre filter
  2. Sterile Syringe filter of all materiel are available.
  3. Free samples are available. We’ve standard sample pack for customers