Continuously operating universal grinder.
- Powerful drive
- Easy to clean working surface made of stainless steel
- Two different grinding heads can be attached to the drive
- Heads are easily changeable
- Grinding heads not incl. with delivery
Technical Data
| MF 10 basic Microfine grinder drive |
| Process type |
inline |
| Operating principle |
cutting/impact |
| Motor rating input |
1000 W |
| Motor rating output |
500 W |
| Speed range |
3000 - 6500 1/min |
| Power-on time ON |
120 min |
| Power-om time OFF |
30 min |
| Milling chamber, can be cooled with water |
no |
| Mill feed can be cooled in milling chamber with dry ice |
yes |
| Mill feed can be cooled in milling chamber with liquid nitrogen |
no |
| Dimensions (W x H x D) |
320 x 380 x 300 mm |
| Weight |
9.7 kg |
| Permissible ambient temperature |
5 - 40 °C |
| Permissible relative moisture |
80 % |
| Protection class according to DIN EN 60529 |
IP 22 |
| RS 232 interface |
no |
| Analog output |
no |
| Voltage |
230 / 115 V |
| Frequency |
50/60 Hz |
| Power input |
1000 W |
| |
Power-on time:
The standard values depend heavily on the material and the desired end fineness (e.g. wood samples can only be ground for a few minutes). We would be glad to perform a sample grinding in our application laboratory. |
|
